4 CHANNEL RELAY BOARD
WITH IP CONTROL KIT
VOLTAGE
BATTERY ZAPPER
OME OF OUR MOST
MONITOR KIT
KIT - MK II
KC-5424 $13.50 plus postage & packing
KC-5427 $63.25 plus postage & packing
WER PROJECT KITS FOR
This versatile kit will allow you to monitor the battery voltage,
This kit produces short bursts of high level energy to reverse
the airflow meter or oxygen sensor in your car. The kit features
the damaging sulphation effect - a common cause of failure in
a 10 LED bar graph that lights the LEDS in response to the
wet lead acid cell batteries. Features a battery health checker
measured voltage, preset 9-16V, 0.-5V or 0-1V ranges
with LED indicator, new circuit protection against badly
KV-3595 $58.00 plus postage & packing
complete with a fast response time, high input impedance and
sulphated batteries, test points for a DMM and connection for a
This 4 input switcher can be given an IP address which allows
auto dimming for night time driving. Kit includes PCB
battery charger. Also includes case
Ewit
eleLh overla
ctronic Ey, LED b
componCar graph
ents. Tand alRl ONICwith screeEnprintedNlid, PCBTwith
overlay and all electronic and view what's going on at your premises by switching your
components with clear English HUSIAcamSeras on Tfrom anSywhere in the world! TVs, air conditioners,
you to switch up to 4 devices. Turn on your security cameras
lighting, or other home appliances can be switched on or off by
• 12VDC
instructions.
utilising this pasword protected module.
• Suitable for 6,
12 & 24V batteries
• Powered by the
battery itself
IMPROVED LOW
VOLTAGE ADAPTOR KIT
KC-5463 $10.50 plus postage & packing
This handy regulator will let you run a variety if devices such as
CD, DVD or MP3 players from your car cigarette lighter sockets
or even a digital camera or powered speakers from the power
supply inside your PC. This unit can will supply either 3V, 5V, 6V,
9V, 12V or 15V) from a
higher input voltage at up
to four amps (with
suitable heatsink). Kit
includes screen
printed PCB and all
specified components. Heatsink
not included.
• Polarity protection • Supports; HTTP, IP, DDNS, and DHCP
• Embedded Web Server
VERSATILE REGULATED
VOLTAGE ADAPTOR KITS
KA-1797 $4.75 plus postage & packing
A low-powered DC converter suited for many applications such
as a peripheral computer power supply, powered speakers,
modems, music/MIDI keyboards, etc. Just plug it's input into
your PC's internal power supply cable and have selectable
regulated voltage out from 3 to 15VDC. Output current
capability is around 1.5
amps depending on the
size of heatsink used
(heat sink sold
separately).
PCB plus electronic
components included.
VOLTAGE
REGULATOR KIT
KC-5446 $10.00 plus postage & packing
This handy voltage regulator can
provide up to 1,000mA at any
voltage from 1.3 to 22VDC. Ideal for
experimental projects or as a
mini bench power supply etc.
Kit supplied with PCB and all
electronic components.
FAST NI-MH BATTERY
CHARGER KIT
KC-5453 $25.00 plus postage & packing
A truly versatile charger, capable of handling up to 15 of the
same type of Ni-MH or Ni-Cd cells. Build it to suit any size cells
or cell capacity and set your own fast or trickle charge rate. It
also has overcharge protection including temperature sensing.
Ideal for R/C enthusiasts who burn through a lot of batteries. Kit
includes PCB and all specified electronic
components. Case, heatsink
and battery holder not
included.
LED BATTERY VOLTAGE
INDICATOR KIT
KA-1778 $6.00 plus postage & packing
This tiny circuit measures just 25 x 25mm and will provide
power indication and low voltage indication using a bi-color
LED, and can be used in just about any piece of battery
operated equipment. Current consumption is only 3mA at 6V
and 8mA at 10V and the circuit is suitable for equipment
powered from about 6-30VDC. With a simple
circuit change, the bi-color
LED will produce a red glow to
indicate that the voltage has
EXCEEDED a preset value.
DC RELAY
SWITCH KIT
KC-5434 $10.00 plus postage & packing
An extremely useful and versatile kit that enables you to
use a tiny trigger current - as low as 400µA at
12V to switch up to 30A at 50VDC. It has an
isolated input, and is suitable for a
variety of triggering options.
The kit includes PCB with
overlay and all electronic
components with clear English
instructions.
FREE CATALOG
Checkout Jaycar’s
extensive range
We have kits & electronic
projects for use in:
• Audio & Video
• Car & Automotive
• Computer • Lighting
• Power • Test & Meters
• Learning & Educational
• General Electronics Projects
• Gifts, Gadgets & Just for fun!
For your FREE catalog logon to
www.jaycar.com/catalog
or check out the range at
www.jaycar.com
• PCB, bi-color LED and all
specified electronic components
supplied.
POST & PACKING CHARGES
Order Value Cost
$25 - $49.99 $7.50
Max weight 12lb (5kg).
$50 - $99.99 $20
Heavier parcels POA.
$100 - $199.99 $40
Minimum order $25.
$200 - $499.99 $60
$500+ $75
Note: Products are despatched from Australia,
so local customs duty & taxes may apply.
Prices valid till 31/07/09
HOW TO ORDER
•ORDER ON-LINE:
www.jaycar.com
• PHONE: 1-800-784-0263
• FAX: + 61 2 8832 3118*
• EMAIL:
techstore@jaycar.com
• POST: P.O. Box 107, Rydalmere NSW 2116 Australia
•ALL PRICING IN US DOLLARS
•MINIMUM ORDER ONLY $25
*Australian Eastern Standard Time (Monday - Friday
09.00 to 17. 30 GMT + 10 hours only)
Expect 10-14 days for air parcel delivery
1-800-784-0263
www.jaycar.com